CYCLAMI A2S Rechargeable Electric Bike Pump – 120 PSI

The CYCLAMI A2S is a compact rechargeable electric pump designed for bicycle tyre inflation and everyday pressure top-ups. Set the required pressure using the digital controls, connect the correct valve adapter, and the pump automatically stops when the selected pressure is reached.

Its compact size makes it easy to carry in a saddle bag, backpack or cycling kit. The supplied silicone protective case improves handling and helps protect the pump during storage and transport.

Key Features

• Maximum inflation pressure: 120 PSI

• Digital pressure display with PSI and BAR units

• Preset pressure control

• Automatic stop when the selected pressure is reached

• Rechargeable battery: 2 × 500 mAh, 7.4 V

• Type-C charging

• Approximate charging time: 45 minutes

• Compatible with Presta and Schrader valves using the included adapters

• Ball needle included

• Extension hose included

• Silicone protective case included

• Compact pump dimensions: 73.6 × 45 × 28.6 mm

• Pump net weight: 136 g

Product Specifications

Brand: CYCLAMI
Model: A2S
Product type: Rechargeable electric bicycle pump
Maximum pressure: 120 PSI
Pressure units: PSI / BAR
Default pressure setting: 100 PSI
Battery: 2 × 500 mAh, 7.4 V
Operating current: 1–7 A
Charging input: 5 V / 1.5 A
Charging port: Type-C
Charging time: Approximately 45 minutes
Pump dimensions: 73.6 × 45 × 28.6 mm
Pump net weight: 136 g
Single-package dimensions: 7.1 × 3.8 × 12.3 cm
Single-package gross weight: 228 g
Valve compatibility: Presta and Schrader valves
Warranty: 12 months

What Is Included

• CYCLAMI A2S electric pump

• Extension hose

• Presta valve adapter

• Schrader valve adapter

• Ball needle

• Silicone protective case

• Type-C charging cable

• User instructions

How to Use

1. Charge the pump using the supplied Type-C cable and a suitable 5 V / 1.5 A power source.

2. Select PSI or BAR on the digital display.

3. Set the required target pressure.

4. Connect the appropriate valve adapter or extension hose.

5. Start inflation.

6. The pump will stop automatically when the selected pressure is reached.

For pressures above 100 PSI, use of the supplied extension hose is recommended.

Automatic Protection Functions

The CYCLAMI A2S includes several automatic protection functions:

• The pump switches off after approximately one minute without operation.

• Continuous inflation stops automatically after approximately three minutes.

• The pump stops if the detected pressure remains below 5 PSI for approximately one minute.

• If the pump becomes too hot, it stops automatically and displays “HOT”.

• Allow the pump to cool before using it again after temperature protection has been activated.

The pump and connected parts may become warm during operation. Handle them carefully after inflation.

Frequently Asked Questions

Does it work with Presta and Schrader valves?

Yes. The package includes adapters for both Presta and Schrader valves.

Does the pump stop automatically?

Yes. Set the required pressure before inflation and the pump will stop automatically when that pressure is reached.

What is the maximum pressure?

The maximum inflation pressure is 120 PSI.

What battery does it use?

The pump is equipped with 2 × 500 mAh batteries and operates at 7.4 V.

How long does charging take?

A full charge takes approximately 45 minutes when using a suitable 5 V / 1.5 A charging source.

What is the difference between the two listed weights?

The pump itself has a net weight of 136 g. The complete single-package gross weight is 228 g.

What is the difference between the two listed sizes?

The pump measures 73.6 × 45 × 28.6 mm. The retail package measures 7.1 × 3.8 × 12.3 cm.

Can it inflate balls?

Yes. A ball needle is included. Always use a pressure suitable for the item being inflated.

What should I do if “HOT” appears?

Stop using the pump and allow it to cool completely before restarting it.

Warranty and Support

This product includes a 12-month warranty.